Intra-city service which operates within a 200 mile radius; high turning and high scrubbing are characteristics
which accelerate wear as compared to like tires in over-the-road applications. There is increased braking and high
torque on these tires caused by sudden starts and stops. Tandem-axle, single-axle, and straight truck vehicle configurations
are used in this application. The bulk of vehicles in this application are Class 6, Class 7 and Class 8.
All
Position
Tires
BDV Built specifically for urban fleets with improved tread wear and wet braking traction through superior tread design. Solid shoulders withstand punishing corners and curbs.
CONVENTIONAL
SIZE
WIDTH
DEPTH
190
190mm
22/32
200
200mm
22/32
210
210mm
22/32
220
220mm
22/32
230
230mm
22/32
240
240mm
22/32
250
250mm
22/32
260
260mm
22/32
BRM
For pickup and delivery industries.
Molded from a revolutionary rubber compound that provides significant improvement in wear at the lowest cost per mile.
CONVENTIONAL
SIZE
WIDTH
DEPTH
190
190mm
26/32
200
200mm
26/32
210
210mm
26/32
220
220mm
26/32
230
230mm
26/32
240
240mm
26/32
250
250mm
26/32
260
260mm
26/32
270
270mm
26/32
280
280mm
26/32
BRM2™
Extra wide uninterrupted shoulder for maximum durability with a smooth sidewall for optimal performance in tight turns.
CONVENTIONAL
SIZE
WIDTH
DEPTH
8
NA
18/32
8.5
NA
18/32
9*
NA
18/32
BRM-WB Provides better wear across
multiple wheel positions. Solid
shoulders combat severe scrubbing.
Wide grooves and open voids
enhance traction.
WIDE BASE
SIZE
WIDTH
DEPTH
290
290mm
20/32
320
320mm
20/32
340
340mm
20/32
365
365mm
20/32
BRR-UWB Features a deeper tread for more miles before removal and straight grooves for excellent water evacuation. Ideal for higher scrub trailer applications.
WIDE BASE
SIZE
WIDTH
DEPTH
390
390mm
16/32
BRX™ Designed to provide uniform wear in various applications. Unique, 5-rib design provides excellent wet traction and off-road traction.
SINGLE / TANDEM / STRAIGHT
SIZE
WIDTH
DEPTH
190
190mm
22/32
200
200mm
22/32
210
210mm
22/32
220
220mm
22/32
240
240mm
22/32
250
250mm
22/32
ECL™ Rib
Run ECL™ Rib fleet wide for both drive-axle and trailer applications.
It's lighter than a lug design, which can improve fuel economy and reduce casing stress.
CONVENTIONAL
SIZE
WIDTH
DEPTH
8
NA
18/32
8.5
NA
18/32
9*
NA
18/32
Highway A truly universal all-wheel position
rib tread with a long history of
proven performance.
CONVENTIONAL - Radial/Bias
SIZE
WIDTH
DEPTH
1
5
14/32
2
5-20/32
14/32
3
6
14/32
4
6-12/32
16/32
5
6-20/32
16/32
6
7
16/32
7
7-20/32
16/32
8
7-31/32
16/32
8.5
8-10/32
17.5/32
9
8-20/32
19/32
R4200 Delivers exceptional mileage in drive applications where above normal traction is not required.
CONVENTIONAL
SIZE
WIDTH
DEPTH
8.5**
8-10/32
20/32
9**
8-20/32
20/32
230**
230mm
20/32
12
9-29/32
20/32
14
10 27.5/32
20/32
** ONLY available with MilEdges
RTP™ An outstanding deep tread for superior mileage in on- and off-the-road uses. Voids are designed to eject stones which can extend casing life.
CONVENTIONAL
SIZE
WIDTH
DEPTH
6
7
18/32
7
7-20/32
18/32
8
8
18/32
8.5
8-10/32
18/32
9*
8-20/32
18/32
9.5
8-28/32
18/32
10.5
9-12/32
18/32
Ultra All-Position™ This low void ration tread will put more rubber on the road for increased tread life and improved traction.
CONVENTIONAL
SIZE
WIDTH
DEPTH
190
190mm
18/32
200
200mm
18/32
210*
210mm
18/32
220
220mm
18/32
230
230mm
18/32
240
240mm
18/32
WH Rib™ A deep rib with excellent penetration resistance for on & off-the-road, slow-speed, short-haul applications. Non-uniform groove wall angles to fight stone retention.
