Bandag
Over-The-Road Tires

---

These tire applications are used by fleets with long haul/line operations or regional operations that exceed a radius of 200 miles. In over-the-road applications, turning and scrubbing are reduced based on the points of travel. Although this application may see some city service, the bulk of these operations have reduced turning and slow tire wear rates. This application may include both single- and tandem-axle configurations.

 

All Position Tires
BDV Built specifically for urban fleets with improved tread wear and wet braking traction through superior tread design. Solid shoulders withstand punishing corners and curbs. CONVENTIONAL SIZE WIDTH DEPTH 190 190mm 22/32 200 200mm 22/32 210 210mm 22/32 220 220mm 22/32 230 230mm 22/32 240 240mm 22/32 250 250mm 22/32 260 260mm 22/32 BRR-UWB Features a deeper tread for more miles before removal and straight grooves for excellent water evacuation. Ideal for higher scrub trailer applications. WIDE BASE SIZE WIDTH DEPTH 390 390mm 16/32   BRX™ Designed to provide uniform wear in various applications. Unique, 5-rib design provides excellent wet traction and off-road traction. TANDEM AXLE SIZE WIDTH DEPTH 190 190mm 22/32 200 200mm 22/32 210 210mm 22/32 220 220mm 22/32 240 240mm 22/32 250 250mm 22/32   ECL™ Rib Run ECL™ Rib fleet wide for both drive-axle and trailer applications. It's lighter than a lug design, which can improve fuel economy and reduce casing stress. CONVENTIONAL SIZE WIDTH DEPTH 8 NA 18/32 8.5 NA 18/32 9* NA 18/32 FCR™ Rib This specially compounded, high mileage tread provides great traction while still allowing excellent fuel efficiency in an all position setting. CONVENTIONAL SIZE WIDTH DEPTH 7 7-20/32 16/32 8* 8 16/32 8.5* 8-10/32 16/32 9* 8-20/32 16/32 230 230mm 16/32 240 240mm 16/32   Highway A truly universal all-wheel position rib tread with a long history of proven performance. CONVENTIONAL - Radial/Bias SIZE WIDTH DEPTH 1 5 14/32 2 5-20/32 14/32 3 6 14/32 4 6-12/32 16/32 5 6-20/32 16/32 6 7 16/32 7 7-20/32 16/32 8 7-31/32 16/32 8.5 8-10/32 17.5/32 9 8-20/32 19/32 R4200 Delivers exceptional mileage in drive applications where above normal traction is not required. CONVENTIONAL SIZE WIDTH DEPTH 8.5** 8-10/32 20/32 9** 8-20/32 20/32 230** 230mm 20/32 12 9-29/32 20/32 14 10 27.5/32 20/32 ** ONLY available with MilEdges Ultra All-Position™ This low void ration tread will put more rubber on the road for increased tread life and improved traction. CONVENTIONAL SIZE WIDTH DEPTH 190 190mm 18/32 200 200mm 18/32 210* 210mm 18/32 220 220mm 18/32 230 230mm 18/32 240 240mm 18/32
Drive Tires
BDL™ Designed for a wide range of applications. Tie bars stabilize shoulders for even, uniform wear. Open lug design delivers off-road traction. TANDEM AXLE SIZE WIDTH DEPTH 190 190mm 20/32 200 200mm 20/32 210 210mm 20/32 220 220mm 20/32 230 230mm 20/32 BDR-AS™ Designed to give your trucks unstoppable traction in almost any weather condition. Overlapping lugs provide lots of gripping power. TANDEM AXLE SIZE WIDTH DEPTH 170 170mm 22/32 180 180mm 22/32 190 190mm 22/32 200 200mm 22/32 210* 210mm 22/32 220* 220mm 22/32 230 230mm 22/32 240 240mm 22/32   BDR-HT Developed and tested under rigorous high torque conditions pulling doubles and triples. SINGLE AXLE SIZE WIDTH DEPTH 210 210mm 28/32 220 220mm 28/32 230 230mm 28/32   BDR-UWB Delivers new tire performance at a fraction of new tire costs. WIDE BASE SIZE WIDTH DEPTH 380 380mm 24/32 390 390mm 24/32   BDR-W Directional drive tread design for extremely aggressive winter traction. TANDEM AXLE SIZE WIDTH DEPTH 200 200mm 23/32 210 210mm 27/32 220 220mm 27/32 230 230mm 27/32 240 240mm 27/32 250 250mm 27/32   BTT™ A proven traction tread designed to provide adequate tread depth for drive tired on Class 8 tractors ready to be traded. TANDEM AXLE SIZE WIDTH DEPTH 210 210mm 16/32 220 220mm 16/32 230 230mm 16/32   Commercial Traction Deep Deeper aggressive drive tread for versatile applications. SINGLE / TANDEM / STRAIGHT SIZE WIDTH DEPTH 700* 7 21.5/32 750* 7-16/32 21.5/32 800* 8 21.5/32 850* 8-16/32 21.5/32   D4300® A deep, all-weather, tread that delivers excellent mileage while meeting the traction requirements of normal linehaul applications. TANDEM AXLE SIZE WIDTH DEPTH 6 7 22/32 7* 7-20/32 22/32 8* 8 22/32 8.5* 8-10/32 22/32 9* 8-20/32 22/32 9.5* 8-28/32 22/32 D4310® / D4310® Deep A deep, all-weather, drive axle tread. Delivers excellent mileage while meeting the traction requirements of normal linehaul applications. TANDEM AXLE SIZE WIDTH DEPTH 7 7-20/32 22/32 8 8 22/32 8.5 8-10/32 22/32 9 8-20/32 22/32 9.5 8-28/32 22/32 10.5D 9-12/32 24/32 250D 250mm 24/32   Drive Trac™ A lightweight, cool-running tread that offers good traction in a variety of applications. TANDEM AXLE - Radial/Bias SIZE WIDTH DEPTH 6 7 18/32 7 7-20/32 18/32 8 8 18/32 8.5 8-10/32 18/32 9 8-20/32 18/32   ECL™ Drive A deep, all-weather drive axle tread ideal for linehaul and local P&D applications. Provides outstanding mileage and traction. SINGLE / TANDEM SIZE WIDTH DEPTH 7 NA 22/32 8 NA 22/32 8.5 NA 22/32 9 NA 22/32 9.5 NA 22/32   ECL™ DSN III This innovative tread starts as a lug design for winter traction; then, as it wears, it becomes a rib design for cool running during the summer. TANDEM AXLE SIZE WIDTH DEPTH 7 NA 21/32 8 NA 21/32 8.5 NA 21/32 9 NA 21/32   ECL™ Mud & Snow For high torque, fast-wearing positions. Ideal for pulling doubles and triples in snow. Excellent for applications which require aggressive traction. TANDEM AXLE SIZE WIDTH DEPTH 6 NA 22/32 7 NA 22/32 8 NA 22/32 8.5 NA 22/32 9 NA 22/32 10.5 NA 22/32   ECL™ SSD Features a symmetrically aggressive tread pattern that cement mixer and tanker fleets will find beneficial. Metric sizes for a better fit. WIDE BASE SIZE WIDTH DEPTH 300 NA 26/32 320 NA 26/32 340 NA 26/32   FCR™ Drive This specially compounded, high mileage tread provides great traction while still allowing for excellent fuel efficiency in the drive position. TANDEM AXLE SIZE WIDTH DEPTH 8 8 20/32 8.5 8-10/32 20/32 9 8-20/32 20/32 230 230mm 20/32 240 240mm 20/32   FuelTech® Drive Using the Synergy™ tread compound, this tread can deliver better fuel economy, while its generous depth increases tread wear and traction. TANDEM AXLE SIZE WIDTH DEPTH 200 200mm 24/32 210 210mm 24/32 220 220mm 24/32 230 230mm 24/32 240 240mm 24/32   Gripper Designed to handle rain or snow while the deep tread depth delivers long mileage. TANDEM AXLE SIZE WIDTH DEPTH 5 6-22/32 20/32 6 7-4/32 22/32 7 7-24/32 22/32 8 8 22/32 8.5 8-10/32 22/32 9 8-22/32 22/32   Gripper Deep Dynamic tread lug pattern provides impressive drive-wheel traction. Deep depth delivers long mileage. TANDEM AXLE SIZE WIDTH DEPTH 4 6-12/32 20/32 325 12-26/32 28/32   MegaTrek™ This is a deep aggressive tread design with solid shoulders that gives outstanding tread wear in over-the-road truckload and LTL applications. TANDEM AXLE SIZE WIDTH DEPTH 200 200mm 26/32 210 210mm 26/32 220 220mm 26/32 230 230mm 26/32 240 240mm 26/32   Ultra Drive™ A deep, all-weather tread with stone penetration protectors. Slotted shoulders and unique blading provide excellent traction. TANDEM AXLE SIZE WIDTH DEPTH 200 200mm 26/32 210 210mm 26/32 220 220mm 26/32 230 230mm 26/32 240 240mm 26/32 250 250mm 26/32   Wide Base Lug An aggressive drive position tread offering excellent mileage in wide base applications. WIDE BASE SIZE WIDTH DEPTH 15 11-13/32 18/32 16.5 11-13/32 18/32 18 11-18/32 18/32   Winter Deep An extra-deep, aggressive traction, drive-axle tread for severe winter conditions. TANDEM AXLE SIZE WIDTH DEPTH 7 7-20/32 26/32 8 8 26/32 8.5 8-10/32 26/32 9 8-22/32 26/32
Trailer Tires
BRM-WB Provides better wear across multiple wheel positions. Solid shoulders combat severe scrubbing. Wide grooves and open voids enhance traction. WIDE BASE SIZE WIDTH DEPTH 290 290mm 20/32 320 320mm 20/32 340 340mm 20/32 365 365mm 20/32   BTL™ Angled 5-rib design prevents stone holding. Rounded shoulders for scrubbing resistance. Provides exceptional wet traction. SINGLE / TANDEM SIZE WIDTH DEPTH 200 200mm 11/32 210 210mm 11/32 220 220mm 11/32 230 230mm 11/32   BTL-SA™ Designed specifically for spread axle and multi-axle applications. This design provides serious protection from casing damage caused by twisting, scraping or scrubbing. SINGLE / TANDEM / SPREAD SIZE WIDTH DEPTH 200 200mm 16/32 210 210mm 16/32 220 220mm 16/32 230 230mm 16/32 240 240mm 16/32   BTR-UWB Delivers new tire performance at a fraction of new tire costs. WIDE BASE SIZE WIDTH DEPTH 380 380mm 24/32 390 390mm 24/32   ECL™ ST-M For on-highway multi-axle applications. Outside ribs enable this tread to withstand the extra stress and punishment out on tires during turns and cornering. SINGLE / TANDEM / SPREAD / WIDE BASE SIZE WIDTH DEPTH 7 NA 16/32 8 NA 16/32 8.5 NA 16/32 9 NA 16/32 10.5 NA 16/32 290 NA 16/32 300 NA 16/32 310 NA 16/32 315 NA 16/32 320 NA 16/32 340 NA 16/32   ECL™ Trailer Wide shoulder rib greatly reduces tearing. Ideal for long-haul operations where severe twisting and turning in docks and ramps occurs. SINGLE / TANDEM SIZE WIDTH DEPTH 8* NA 14/32 8.5* NA 14/32 9* NA 14/32 9.5 NA 14/32   FCR™ Trailer A specially compounded, high mileage shallow tread designed for today's trailers. Great traction while still allowing for excellent fuel efficiency. SINGLE / TANDEM SIZE WIDTH DEPTH 7* 7-20/32 11/32 8* 8 11/32 8.5* 8-10/32 11/32 9* 8-20/32 11/32 230* 230mm 11/32 240* 240mm 11/32   FuelTech® Trailer Using a special compound this tread can deliver better fuel economy, and its generous depth increases tread wear and traction. SINGLE / TANDEM SIZE WIDTH DEPTH 200 200mm 12/32 210 210mm 12/32 220 220mm 12/32 230 230mm 12/32   HI Speed A 5-rib tread design for over-the-road trailer applications. SINGLE/TANDEM - Radial/Bias SIZE WIDTH DEPTH 4 6-12/32 11/32 5 6-20/32 11/32 6 6-30/32 11/32 7 7-20/32 11/32 8 8 12/32 8.5* 8-10/32 12/32 9* 8-20/32 12/32   Inter Transit Rib™ Bias A lightweight rib tread in two sizes to accommodate traditional bias casings still used on intermodal trailers. INTERMODAL - Radial/Bias SIZE WIDTH DEPTH 180 180mm 11/32 190 190mm 11/32   Inter Transit Rib™ Radial A lightweight rib tread in two sizes to accommodate some of the more popular radial casings used on intermodal trailers. INTERMODAL SIZE WIDTH DEPTH 200 200mm 11/32 210 210mm 11/32   T4100® A 5-rib with deep tread depth. Assures exceptional tread wear. SINGLE / TANDEM SIZE WIDTH DEPTH 7 7-20/32 15/32 8 8 15/32 8.5 8-10/32 15/32 9 8-22/32 15/32   T4100® w/ MilEdges® A 5-rib with deep tread depth and exclusive MilEdges®. Assures exceptional tread wear and excellent wet-road stability. SINGLE / TANDEM SIZE WIDTH DEPTH 7 7-20/32 15/32 8 8 15/32 8.5 8-10/32 15/32 9 8-22/32 15/32 9.5 8-28/32 15/32 10.5 9-12/32 15/32 Wide Base Rib This 5-rib, all-wheel-position tread is ideal for wide-base service where outstanding mileage is an important criterion. WIDE BASE - Radial/Bias SIZE WIDTH DEPTH 15 11-13/32 16/32 16.5 12-31/32 16/32 18 13-18/32 16/32